Frequently Asked Questions About Wood Borer Treatment

Key indicators include the appearance of tiny circular pinholes (1–2 mm across) on wooden surfaces, fine yellowish or white wood powder (frass) accumulating below the holes, and localized hollow-sounding or brittle timber edges.

Common signs include fresh powder heaps reappearing after cleaning, visible round exit flight holes, crumbling timber corners, loose veneer laminates, and occasionally finding small adult beetles near windows during breeding periods.

The small holes (often called shot-holes or pinholes) are exit holes created by adult wood-boring beetles as they chew their way out of the timber after completing their larval and pupal development inside.

The powder is frass (bore-dust), composed of finely chewed, digested wood particles ejected from the internal gallery networks by emerging adult beetles and active larvae.

Wood borers are commonly found in solid wood dining tables, chairs, bed frames, wardrobe plywood backs, wooden door leaves, window frames, parquet flooring, modular kitchen cabinets, and structural timber beams.

At SLV Pest Control, pricing is provided after an on-site inspection. The total investment depends on the number of affected furniture pieces, doorframes, the volume of structural timber, and the extent of internal tunneling.

Yes. A thorough inspection is essential to differentiate between active and dormant infestations, locate all affected pieces across the property, and determine whether syringe injection, surface brush coating, or combined methods are needed.

The duration of treatment depends on the total count of furniture pieces, linear footage of doorframes, and accessibility of unpolished surfaces. Because each active exit hole is individually injected, treatment time is customized to the scope of each property.

Yes. Polished and unpolished wooden furniture can be treated using targeted micro-syringe injection into existing flight holes without damaging the outer finish, combined with preservative treatment on unfinished back surfaces.

Yes. Both solid wood and flush doors, as well as main door frames, window sills, and architraves, can be treated using precision injection and targeted preservative application.

Clear personal belongings, clothing, or crockery from inside affected wardrobes and cabinets. Wipe away existing dust from around flight holes to allow clear visibility of active pinholes for our technicians.

Allow treated surfaces to dry thoroughly according to the technician's guidance. Keep treated rooms well-ventilated, avoid immediately washing or polishing treated surfaces, and monitor the area periodically for any residual or new powder ejection.

Activity can recur if new, untreated wooden furniture with unhatched beetle eggs is introduced into the home, or if larvae located deep within dense timber escape initial contact. Ongoing monitoring and periodic reviews help ensure sustained protection.